The E-Image 2-Stage Aluminium Tripod Legs with GH03 Head supports cameras and accessories weighing up to 4kg (9lbs). It includes a GH03 fluid head, a GA752 two stage aluminium legs, and a GS01 mid-level spreader. The head and legs feature a 75mm ball/bowl. The tripod extends to a height of 168cm and collapses down as low as 75cm. A kit bag is included.
The GH03 head features an Easy Lock Baseplate system that combines the balance adjustment of a sliding baseplate with the ease of a quick release system. It provides fixed counterbalance that helps the fluid head support loads up to 11 pounds. With variable fluid drag on both pan and tilt, you can adjust the fluid head to suit your shooting style or the needs of the shot. The head features a built in 1/4"-20 accessory socket for available monitor support arms or other accessory items. It includes a padded carry bag with a shoulder strap
The Easy Lock baseplate provides the balance adjustment range associated with a sliding balance plate but combines the ease of a quick release, as you can pop the camera (on the Easy Lock plate) into the top of the fluid head without having to support the camera while lining up the plate with the head. Easy to pop in, it stays secure until you release it, and you maintain the sliding balance adjustments.
Mono-Lock design allows you to lock and unlock the three sections of each leg using only one locking lever. The rotating lever provides a robust clamp mechanism that secures the legs and prevents them from slipping once locked. The single lever on each leg allows you to quickly lock the leg height without having to use two levers, making for a quicker workflow and sparing your back from having to bend down to open a bottom leg lock to raise the legs.
The legs feature dual spiked feet that provide solid purchase in soft surfaces when the legs are spread wide or extended to full height.
The rubber feet attach to the spiked feet for working on delicate or hard surfaces.
The Easy Lock camera plate features a guided sled with a locating pin and supports both 1/4"-20 and 3/8"-16 camera tie-down screws (included).