Description Note: Product does not include batteries
Nitecore's versatile and compact MH27UV Multi-Spectrum LED Flashlight is as powerful as larger search lights yet fits comfortably in your hand. This illuminator uses a white Cree XP-L HI V3 primary LED to produce four outputs from an energy-saving 1 lumen minimum output, to a darkness-piercing 1000-lumen turbo.
In addition to the white emitter, there is an array of secondary-coloured LEDs - blue, red, and ultraviolet - set around the main reflector that provide coloured light to perform tasks without interfering with night-adjusted vision. Adding to the MH27UV's versatility are three strobe modes and three coloured flashing modes that can be used for everything from directing traffic to sending a distress signal.
The light is designed with tactical professionals in mind. It has a two-stage pushbutton tailcap switch with momentary and constant-on modes. This switch has last-mode-memory for the primary outputs and strobe mode so you can set the output ahead of time and go right to that intensity or mode immediately. For special situations, users have instant access to both the UV LED light and 1000-lumen Turbo output for chequing IDs and lighting large areas or to search. An included tactical ring can be installed on the handle to help facilitate various pistol/light grip techniques.
Complementing the multiple light outputs is a housing that is built to withstand years of use. Its aluminium alloy body has a scratch and corrosion-resistant Type III hard anodised finish, with a scratch-resistant tempered reflector window that has an anti-reflection coating to maximise light transmission. The light is impact-resistant and IPX8-rated, making it fully submersible to a depth of over 6.5 feet. Heat diffusing fins built into the head provide passive overheat protection, while heat-management circuitry automatically monitors and adjusts the output and performance to prevent damage to the light. This flashlight includes a quality USB charger, holster, clip, tactical ring, lanyard, spare charging port cover, spare O-ring and a spare tailcap cover.
Key Features: Performance White light: Low: 1 lumen Moed: 55 lumen High: 250 lumen Turbo: 1000 lumen Coloured light: Blue: 3 lumen Red: 13 lumen UV: 500mW @ 365nm One primary white Cree XP-L HI V3 LED One each - Blue/Red/UV - secondary LEDs Blue LED: Highlights fluids such as blood for tracking Red LED: Illuminates without affecting night adjusted vision to read or perform tasks UV LED: Use for authenticating money, IDs, etc. and fluorescence activation Smooth aluminium reflector produces a bright centre cone of light with large, dimmer peripheral ring
Special Modes Disorientating strobe mode SOS distress signal: Automatically cycles through Morse code sequence Location beacon: Emits a slow steady flash to signal location "Police" warning signals: Mode 1: Alternates between Red and Blue LEDs to simulate police lights Mode 2: Flashing Red LED only Mode 3: Flashing Blue LED only
Switching Type: Pushbutton Location: Tailcap and Body Tailcap: Controls on/off with last mode memory for primary outputs and strobe mode Body: Dual switches control output intensity and mode selection Momentary and constant-on activation Instant access to Turbo output and Red LED
Charge Time 6 h with one 18650 Li-ion battery installed Construction Aluminium alloy Waterproofing IPX8-rated, submersible to 6.6' / 2.0 m for up to 30 minutes Impact Resistance Yes Dimensions Head: 1.6" / 4.0 cm Handle: 1.0" / 2.5 cm Length: 6.1" / 15.4 cm Weight 6.0 oz / 170.0 g, without battery