
Minelab WM 08 Wireless Audio Module & Charging Cable
Keep your favourite wired headphones, but remove the cable running back to your detector. The Minelab WM 08 receives audio wirelessly from compatible EQUINOX detectors using Minelab Wi-Stream technology, giving you fast, responsive target audio while you move more freely in the field.
Why choose the WM 08?
Standard wired headphones are reliable, familiar and often more comfortable for long detecting sessions, but the cable can catch on clothing, tools, scrub or your detector shaft. The WM 08 solves that by letting you plug your wired headphones into a small module worn on your clothing, while the detector sends the audio wirelessly.
For detectorists who rely on precise audio timing, the big advantage is responsiveness. Wi-Stream is designed for fast detector audio, so target tones arrive with much less delay than standard Bluetooth. This helps when you are sweeping across a target and trying to pinpoint where the strongest response actually sits in the ground.
Ultra-fast response
Approx. 17 ms Wi-Stream audio delay between compatible EQUINOX detectors and the WM 08 module.
Use wired headphones
Plug in your preferred 3.5 mm / 1⁄8-inch wired headphones and avoid a long headphone lead connected to the detector control pod.
Long field runtime
Typical battery runtime is approximately 18 hours, with magnetic USB charging for simple top-ups between hunts.
Training friendly
Up to four WM 08 modules can be paired and used at the same time, useful for coaching or shared listening sessions.
Detector compatibility
Compatible detectors
- Minelab EQUINOX 600
- Minelab EQUINOX 800
Not compatible with
- EQUINOX 700 or EQUINOX 900
- MANTICORE
- X-TERRA PRO or X-TERRA ELITE
- VANQUISH series
- CTX 3030, GPZ series or older WM 10 / WM 12 audio systems
- Generic Bluetooth transmitters or Bluetooth-only headphones by themselves
Technical specifications
| Specification | Details |
|---|---|
| Product name | Minelab WM 08 Wireless Audio Module & Charging Cable |
| Minelab SKU / part number | 3011-0371 |
| Product type | Wireless audio receiver module for compatible Minelab EQUINOX detectors |
| Wireless technology | Minelab Wi-Stream digital wireless audio |
| Approximate wireless latency | 17 ms between EQUINOX 600/800 and WM 08 |
| Latency comparison | WM 08 Wi-Stream: approx. 17 ms; aptX Low Latency: approx. 40 ms; standard Bluetooth: approx. 100 ms |
| Compatible detector models | Minelab EQUINOX 600 and Minelab EQUINOX 800 |
| Headphone output | 3.5 mm / 1⁄8-inch headphone socket |
| Speaker | No built-in speaker; headphones are required |
| 1⁄4-inch headphone support | Can be used with a suitable 1⁄8-inch to 1⁄4-inch headphone adaptor cable, such as Minelab part 3011-0369, where required |
| Waterproof headphone socket compatibility | Socket is compatible with Minelab EQUINOX waterproof headphones, but the WM 08 module itself must not be submerged |
| Water resistance | Water resistant only; not designed for underwater use |
| Battery type | Internal rechargeable lithium-ion battery |
| Typical battery runtime | Approximately 18 hours |
| Charging connection | USB-A to magnetic WM 08 charging connector |
| Approximate charge time | Approximately 3 hours from flat to 100% when using a high-capacity charger greater than 1.7 A at 5 V |
| Power bank use | Can continue operating while connected to a USB power bank; the power bank charges the WM 08 during use |
| Controls | Power button and pairing button |
| Status indicators | Battery status LED and connection status LED |
| Low battery indication | Status LED flashes red when the battery requires charging |
| Charging indication | LED flashes green while charging and remains on when fully charged |
| Multiple module support | Up to four WM 08 audio modules can be paired and used simultaneously with one compatible EQUINOX detector |
| Mounting / wearing | Can be attached to clothing using the integrated wire clip |
| Recommended wearing position | Wear on the same side of your body as the detector for the most reliable wireless signal |
| Wireless limitations | Bluetooth headphones and the WM 08 cannot be used at the same time |
| In the box | WM 08 wireless audio module and magnetic USB charging cable |
| Physical dimensions / weight | Not published in the verified Minelab product information available for this accessory |
Best for
- EQUINOX 600 or EQUINOX 800 users wanting faster wireless audio than standard Bluetooth.
- Detectorists who prefer their own wired headphones for comfort, fit or sound quality.
- Long sessions where cable snagging becomes frustrating.
- Users replacing a lost or damaged WM 08 module.
- Training situations where more than one person needs to hear the detector audio.
Important to know
- This is a receiver module, not a pair of wireless headphones.
- You still need wired headphones plugged into the WM 08.
- The module is not waterproof and should not be submerged.
- For underwater detecting, use the correct Minelab waterproof wired headphones connected directly to the detector.
- Keep the module away from strong nearby wireless devices where possible, such as a smartphone sitting directly beside it.
How it works
WM 08 vs Bluetooth headphones
| Audio option | Typical use | Approx. latency |
|---|---|---|
| WM 08 Wi-Stream | Fastest wireless option for EQUINOX 600/800 users who want to use wired headphones wirelessly | Approx. 17 ms |
| aptX Low Latency Bluetooth | Convenient wireless headphones with lower delay than standard Bluetooth | Approx. 40 ms |
| Standard Bluetooth | General wireless headphone connection, but less ideal for fast sweep target positioning | Approx. 100 ms |
| Wired headphones direct to detector | Simple, reliable audio connection, but with a cable running from your headphones to the detector | Wired connection |
Bottom line
The WM 08 is a practical upgrade or replacement accessory for EQUINOX 600 and EQUINOX 800 users who want fast wireless detector audio without giving up their preferred wired headphones. It is especially useful when target response timing matters, when you dislike headphone cables running to the control pod, or when you want a spare module ready for longer detecting sessions.


































































































