About this product
The Pro Studio Rail System is a modular overhead lighting suspension system which can be expanded or modified to your requirements. It provides precise positioning of lights with ease and speed eliminating the clutter of light stands and power cables on the floor. The systems utilize a combination of rails carriages telescopic posts and manual spring/cable assisted or motorized pantographs.This is an 3 Pantograph System for a large-size studio.- Aluminum rails in this kit are 9 inch 10 inch and 13 inch 3 inch .- This kit features 2 stationary and 2 moving rails. - The Pantograph supports a load of up to 26lbs suspended from 1 inch 6 inch to 6 inch 6 inch using only the friction device while loads up to a maximum of 40lbs require the use of the optional springs. The pantograph can be adjusted to keep suspended loads from 2lbs to 10lbs perfectly balanced. The colored ring can adjust the pantograph inch s friction; this will ensure that the load remains stable when set in position but that it will move smoothly up and down when necessary. It is advisable to use springs to aid raising the pantograph. - Each pantograph extends from 1 inch 6 inch to 6 inch 6 inch . - Nylon wheels with metal ball bearings ensure safe operation with loads of up to 39.5 lbs. - Extruded aluminum rails enable efficient utilization of studio perimeter walls and corners for back lighting drapes and background paper. - All components are black to eliminate unwanted reflections. - Accessories may be ordered separately to augment and customize the system to your specific requirements. Note: Sliding rails cannot be joined. To connect two fixed rails use code FF3208. You must always support the junction of two rails with a ceiling attachment placed on the junction itself. Note: Moving rails longer than 118 inch must be supported with more than two fixed rails. The maximum distance between any of these fixed rails is 78.7 inch .